Start SQL Server Surface Area Configuration > Remote connections Select “using both TCP/IP and named pipes” Start “SQL Server Configuration Manager” Find out the dynamic port Now connect to the SQL server from a remote server: HOSTNAMESERVER\MSSQL$SQLEXP_VIM,49382
nano /etc/network/interfaces auto wlan0 iface wlan0 inet dhcp wpa-ssid YOUR-SSID-HERE wpa-psk YOUR-PASSWORD-HERE
airmon-ng start wlan0 airodump-ng mon0 iwconfig wlan0 essid SSID-NAME channel X iwconfig wlan0 airodump-ng -c 4 -a –bssid MACADDRESS-AP mon0 airmon-ng stop wlan0 macchanger -m MACADDRESS-CLIENT wlan0 ifconfig wlan0 down ifconfig wlan0 up iwconfig wlan0 essid SSID-NAME channel 4 iwconfig wlan0
airmon-ng start wlan0 airmon-ng airodump-ng mon0 get the mac of the hidden SIDD and do a de-auth attack to force disconnect all wireless clients aireplay-ng -0 2 -a xx:xx:xx:xx:xx:xx mon0 now you can see the SSID
ifconfig wlan0 down iw reg set US iwconfig wlan0 txpower 27 iwconfig
ifconfig eth0 192.168.1.222/24 up route add default gw 192.168.1.1 echo nameserver 8.8.8.8 > /etc/resolv.conf update-rc.d networking defaults
This is a HOWTO for installing VMware Tools on Centos 6.x. Update your system so the kernel headers/devel will match your system: yum update Install the VMware tools prerequisites: yum install make gcc kernel-devel kernel-headers glibc-headers perl Reboot the server: shutdown -r now Mount the VMware Tools CD (after inserting it into the VM) mkdir /media/cdrom mount /dev/cdrom /media/cdrom Copy the install bundle from the CD and extract it. cp /media/cdrom/VMware-Tools*.tar.gz /root cd /root tar xvfz VMwareTools*.tar.gz Run the installer, default on all prompts works fine. ...
Sometimes when a LUN is full a VM cannot shutdown properly Make a SSH connection to the host where the VM running at Login as root list all running VM’s # vmware-cmd -l Get the current state # vmware-cmd /vmfs/volumes/<UUID>/<VMDIR>/<VMNAME>.vmx getstate Output: [root@esx ~]# vmware-cmd /vmfs/volumes/<UUID>/<VMDIR>/<VMNAME>.vmx getstate getstate() = stuck Now you know for sure the status is stuck you can kill the VM ps auxwww |grep -i <VMNAME>.vmx</span> Output: root 3093 0.0 0.3 2016 860 ? S< Jul30 0:17 /usr/lib/vmware/bin/vmkload_app /usr/lib/vmware/bin/vmware-vmx -ssched.group=host/user -# name=VMware ESX Server;version=3.5.0;licensename=VMware ESX Server;licenseversion=2.0 build-158874; -@ pipe=/tmp/vmhsdaemon-0/vmx569228e44baf49d1; /vmfs/volumes/49392e30-162037d0-17c6-001f29e9abec/<VMDIR>/<VMNAME>.vmx The code right after root is the PID you must kill. First try only kill #kill 3093 Wait 30 seconds and try a getstate again: # vmware-cmd /vmfs/volumes/<UUID>/<VMDIR>/<VMNAME>.vmx getstate If the state is “off” your ready. If the state is still stuck try the following: #kill -9 3093 Wait 30 seconds and see the state is “off” now. If the state is still “stuck” migrate all VM’s to another host en reboot the host. ...
There are a lot of security issues because of bad plugins (Java, Flash, etc). You can disable all plugins by default so you must click to activate. about:config plugins.click_to_play set value to true Restart the browser Now all plugin are diabled by default and you must click to activate.
Finally I found a nice project for my Raspberry PI :) I’ll write down some notes in this post to make it easier to find back some linux commands. Please use this documentation only as a white hat hacker and for learning purposes only!!!! First: Have a compatible USB wireless dongle (list @ pwnpi.net ) Download PwnPI @ pwnpi.net Download win32diskimager @ http://sourceforge.net/projects/win32diskimager/ Write the image to a SD card Boot up your PI (with a network cable) Scan the network (I use netscan.exe) Connect with putty to your device To break in a WPS compatible wireless access point: ...